|
|
| • Fitting of the mounting bracket to the spacer. |
|
4. Position the mounting
bracket
on the spacer.
Remember that the shape
of the mounting bracket
varies depending on whether
the barrier is on the right
or left hand side. |
 |
| • Fitting of the w-beam guardrail. |
|
5. Attach the barrier, the light reflector and the mounting bracket to the spacer with a M16x40 mushroom headed bolt with nut and washer.
6. Join one length of barrier to another using eight M16x30 mushroom headed bolts with nuts and washers, overlapping the two in such a manner that no leading edges face the flow of traffic.
7. Align and adjust the height of the barrier, and establish the tightening torque of the bolts. Remember that the upper part of the barrier should be between 70 and 75 cm. from the ground.
|
|
