|
|
| • Fitting the motorcycle rail. |
 |
| 4. Attach the motorcycle rail to the mounting bracket assembly using an M16x40 mm. mushroom headed bolt with nut and washer. |
| 5. Join one length of motorcycle rail to another using four M16x30 mm. mushroom headed bolts with nuts and washers, overlapping the two in such a manner that no leading edges face the flow of traffic. |
6. Align and adjust the height of the motorcycle rail, and establish the tightening torque of the bolts. Remember that the lower edge of the rail should be 6 cm. from the ground.
|
 |
 |
|
